|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_Open (rm_ble_mesh_model_client_ctrl_t *const p_ctrl, rm_ble_mesh_model_client_cfg_t const *const p_cfg) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_Close (rm_ble_mesh_model_client_ctrl_t *const p_ctrl) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_GetModelHandle (rm_ble_mesh_model_client_ctrl_t *const p_ctrl, rm_ble_mesh_access_model_handle_t *const p_model_handle) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_SendReliablePdu (rm_ble_mesh_model_client_ctrl_t *const p_ctrl, uint32_t req_opcode, void const *const p_parameter, uint32_t rsp_opcode) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_LevelGet (rm_ble_mesh_model_client_ctrl_t *const p_ctrl) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_LevelSet (rm_ble_mesh_model_client_ctrl_t *const p_ctrl, void const *const p_parameter) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_LevelSetUnacknowledged (rm_ble_mesh_model_client_ctrl_t *const p_ctrl, void const *const p_parameter) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_LastGet (rm_ble_mesh_model_client_ctrl_t *const p_ctrl) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_DefaultGet (rm_ble_mesh_model_client_ctrl_t *const p_ctrl) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_DefaultSet (rm_ble_mesh_model_client_ctrl_t *const p_ctrl, void const *const p_parameter) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_DefaultSetUnacknowledged (rm_ble_mesh_model_client_ctrl_t *const p_ctrl, void const *const p_parameter) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_RangeGet (rm_ble_mesh_model_client_ctrl_t *const p_ctrl) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_RangeSet (rm_ble_mesh_model_client_ctrl_t *const p_ctrl, void const *const p_parameter) |
|
fsp_err_t | RM_MESH_GENERIC_PL_CLT_RangeSetUnacknowledged (rm_ble_mesh_model_client_ctrl_t *const p_ctrl, void const *const p_parameter) |
|
Overview
Target Devices
The BLE Mesh Network Generic Power Level Client module supports the following devices.
Configuration
Build Time Configurations for rm_mesh_generic_pl_clt
The following build time configurations are defined in fsp_cfg/rm_mesh_generic_pl_clt_cfg.h:
Configuration | Options | Default | Description |
Configurations for Networking > BLE Mesh Network modules > BLE Mesh Model Generic Power Level Client (rm_mesh_generic_pl_clt)
This module can be added to the Stacks tab via New Stack > Networking > BLE Mesh Network modules > BLE Mesh Model Generic Power Level Client (rm_mesh_generic_pl_clt).
Configuration | Options | Default | Description |
Interrupts |
Callback Provided When Timeout Occurs | Name Must Be a Valid C Symbol | NULL | Callback provided when mesh generic power level client ISR occurs |
Name | Name Must Be a Valid C Symbol | g_rm_mesh_generic_pl_clt0 | Module name. |
◆ rm_mesh_generic_pl_clt_instance_ctrl_t
struct rm_mesh_generic_pl_clt_instance_ctrl_t |
◆ RM_MESH_GENERIC_PL_CLT_Open()
Open Generic_Power_Level Client middleware. This is to initialize Generic_Power_Level Client model and to register with Access layer.
Implements rm_ble_mesh_model_client_api_t::open.
Example:
- Return values
-
FSP_SUCCESS | Model opened successfully. |
FSP_ERR_ASSERTION | Pointer to control block or configuration structure is NULL. |
FSP_ERR_ALREADY_OPEN | Model is already open. |
FSP_ERR_NOT_FOUND | The number of models has exceeded the limit. |
FSP_ERR_ABORTED | Model initialization is failed. |
◆ RM_MESH_GENERIC_PL_CLT_Close()
Close Generic_Power_Level Client middleware.
Implements rm_ble_mesh_model_client_api_t::close.
Example:
- Return values
-
FSP_SUCCESS | Model successfully closed. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
◆ RM_MESH_GENERIC_PL_CLT_GetModelHandle()
This is to get the handle of Generic_Power_Level client model. Implements rm_ble_mesh_model_client_api_t::getModelHandle.
Example:
- Return values
-
FSP_SUCCESS | Got model handle successfully. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_POINTER | The parameter p_model_handle is NULL. |
◆ RM_MESH_GENERIC_PL_CLT_SendReliablePdu()
This is to initialize sending acknowledged commands. Implements rm_ble_mesh_model_client_api_t::sendReliablePdu.
Example:
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_PL_CLT_LevelGet()
Generic Power Level Get message is an acknowledged message used to get the Generic Power Actual state of an element. The response to the Generic Power Level Get message is a Generic Power Level Status message. There are no parameters for this message.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_pl_clt control block. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_PL_CLT_LevelSet()
Generic Power Level Set is an acknowledged message used to set the Generic Power Actual state of an element. The response to the Generic Power Level Set message is a Generic Power Level Status message.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_pl_clt control block. |
[in] | p_parameter | Pointer to Generic Power Level Set message. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_PL_CLT_LevelSetUnacknowledged()
Generic Power Level Set Unacknowledged is an unacknowledged message used to set the Generic Power Actual state of an element.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_pl_clt control block. |
[in] | p_parameter | Pointer to Generic Power Level Set message. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_PL_CLT_LastGet()
Generic Power Last Get is an acknowledged message used to get the Generic Power Last state of an element. The response to a Generic Power Last Get message is a Generic Power Last Status message. There are no parameters for this message.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_pl_clt control block. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_PL_CLT_DefaultGet()
Generic Power Default Get is an acknowledged message used to get the Generic Power Default state of an element. The response to a Generic Power Default Get message is a Generic Power Default Status message. There are no parameters for this message.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_pl_clt control block. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_PL_CLT_DefaultSet()
Generic Power Default Set is an acknowledged message used to set the Generic Power Default state of an element. The response to the Generic Power Default Set message is a Generic Power Default Status message.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_pl_clt control block. |
[in] | p_parameter | Pointer to Generic Power Default Set message. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_PL_CLT_DefaultSetUnacknowledged()
Generic Power Default Set Unacknowledged is an unacknowledged message used to set the Generic Power Default state of an element.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_pl_clt control block. |
[in] | p_parameter | Pointer to Generic Power Default Set message. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_PL_CLT_RangeGet()
Generic Power Range Get is an acknowledged message used to get the Generic Power Range state of an element. The response to the Generic Power Range Get message is a Generic Power Range Status message. There are no parameters for this message.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_pl_clt control block. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_PL_CLT_RangeSet()
Generic Power Range Set is an acknowledged message used to set the Generic Power Range state of an element. The response to the Generic Power Range Set message is a Generic Power Range Status message.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_pl_clt control block. |
[in] | p_parameter | Pointer to Generic Power Range Set message. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_PL_CLT_RangeSetUnacknowledged()
Generic Power Range Set Unacknowledged is an unacknowledged message used to set the Generic Power Range state of an element.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_pl_clt control block. |
[in] | p_parameter | Pointer to Generic Power Range Set message. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |