Overview
Target Devices
The BLE Mesh Network Generic Power On Off Client module supports the following devices.
Configuration
Build Time Configurations for rm_mesh_generic_poo_clt
The following build time configurations are defined in fsp_cfg/rm_mesh_generic_poo_clt_cfg.h:
Configuration | Options | Default | Description |
Configurations for Networking > BLE Mesh Network modules > BLE Mesh Model Generic Power On Off Client (rm_mesh_generic_poo_clt)
This module can be added to the Stacks tab via New Stack > Networking > BLE Mesh Network modules > BLE Mesh Model Generic Power On Off Client (rm_mesh_generic_poo_clt).
Configuration | Options | Default | Description |
Interrupts |
Callback Provided when Timeout Occurs | Name Must Be a Valid C Symbol | NULL | Callback provided when mesh generic power on off client ISR occurs |
Name | Name Must Be a Valid C Symbol | g_rm_mesh_generic_poo_clt0 | Module name. |
◆ rm_mesh_generic_poo_clt_instance_ctrl_t
struct rm_mesh_generic_poo_clt_instance_ctrl_t |
◆ RM_MESH_GENERIC_POO_CLT_Open()
Open Generic_Power_Onoff Client middleware. This is to initialize Generic_Power_Onoff Client model and to register with Access layer.
Implements rm_ble_mesh_model_client_api_t::open.
Example:
- Return values
-
FSP_SUCCESS | Model opened successfully. |
FSP_ERR_ASSERTION | Pointer to control block or configuration structure is NULL. |
FSP_ERR_ALREADY_OPEN | Model is already open. |
FSP_ERR_NOT_FOUND | The number of models has exceeded the limit. |
FSP_ERR_ABORTED | Model initialization is failed. |
◆ RM_MESH_GENERIC_POO_CLT_Close()
Close Generic_Power_Onoff Client middleware.
Implements rm_ble_mesh_model_client_api_t::close.
Example:
- Return values
-
FSP_SUCCESS | Model successfully closed. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
◆ RM_MESH_GENERIC_POO_CLT_GetModelHandle()
This is to get the handle of Generic_Power_Onoff client model.
Implements rm_ble_mesh_model_client_api_t::getModelHandle.
Example:
- Return values
-
FSP_SUCCESS | Got model handle successfully. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_POINTER | The parameter p_model_handle is NULL. |
◆ RM_MESH_GENERIC_POO_CLT_SendReliablePdu()
This is to initialize sending acknowledged commands.
Implements rm_ble_mesh_model_client_api_t::sendReliablePdu
Example:
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_POO_CLT_OnpowerupGet()
Generic OnPowerUp Get is an acknowledged message used to get the Generic OnPowerUp state of an element. The response to the Generic OnPowerUp Get message is a Generic OnPowerUp Status message. There are no parameters for this message.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_poo_clt control block. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_POO_CLT_OnpowerupSet()
Generic OnPowerUp Set is an acknowledged message used to set the Generic OnPowerUp state of an element. The response to the Generic OnPowerUp Set message is a Generic OnPowerUp Status message.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_poo_clt control block. |
[in] | p_parameter | Pointer to Generic OnPowerUp Set message. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |
◆ RM_MESH_GENERIC_POO_CLT_OnpowerupSetUnacknowledged()
Generic OnPowerUp Set Unacknowledged is an unacknowledged message used to set the Generic OnPowerUp state of an element.
- Parameters
-
[in] | p_ctrl | rm_mesh_generic_poo_clt control block. |
[in] | p_parameter | Pointer to Generic OnPowerUp Set message. |
- Return values
-
FSP_SUCCESS | Operation succeeded. |
FSP_ERR_ASSERTION | The parameter p_ctrl is NULL. |
FSP_ERR_NOT_OPEN | Model is not open. |
FSP_ERR_INVALID_ARGUMENT | Input parameter is invalid. |
FSP_ERR_INVALID_POINTER | The parameter p_parameter is NULL. |
FSP_ERR_APPROXIMATION | Lower layer is invalid state. |
FSP_ERR_NOT_FOUND | Input parameter is not found. |
FSP_ERR_INVALID_ADDRESS | Invalid source address. |
FSP_ERR_OUT_OF_MEMORY | Memory allocation is failed. |
FSP_ERR_OVERFLOW | TX queue is full. |
FSP_ERR_UNDERFLOW | TX queue is empty. |
FSP_ERR_ABORTED | Operation is failed. |