RA0E2

Detailed Description

Build Time Configurations for ra0e2_fsp

The following build time configurations are defined in fsp_cfg/bsp/bsp_mcu_family_cfg.h:

Configuration	Options	Default	Description
Enable inline BSP IRQ functions	Enabled Disabled	Disabled	Using static inline functions will slightly increase code size, but will slightly decrease cycles taken in ISRs in return.
Main Oscillation Stabilization Time	2^8/MOSC 2^9/MOSC 2^10/MOSC 2^11/MOSC 2^13/MOSC 2^15/MOSC 2^17/MOSC 2^18/MOSC	2^18/MOSC
Use Low Voltage Mode	Not Supported	Not Supported	Use the low voltage mode. This limits the ICLK operating frequency to 4 MHz and requires all clock dividers to be at least 4 when oscillation stop detection is used.

Macros
#define	BSP_ELC_PERIPHERAL_MASK

Enumerations
enum	elc_event_t
enum	icu_event_t
enum	elc_peripheral_t

Macro Definition Documentation

BSP_ELC_PERIPHERAL_MASK

#define BSP_ELC_PERIPHERAL_MASK

Positions of event link set registers (ELSRs) available on this MCU

Enumeration Type Documentation

elc_event_t

enum elc_event_t

Sources of event signals to be linked to other peripherals or the CPU

Note

This list is device specific.

icu_event_t

enum icu_event_t

Fixed vector enumeration

Note

This list is device specific.

elc_peripheral_t

enum elc_peripheral_t

Possible peripherals to be linked to event signals

Note

This list is device specific.